Cell Site A/C Controller - Model 2430

Microprocessor-based Cell Site A/C Control

The Model 2430 is designed specifically to execute full HVAC control of above ground structures to assure a precisely controlled and safe environment for telecommunications equipment and personnel working within the structure. The Model 2430 provides demand logic control for two air conditioning units for cooling, heating and economizer operation. Lead air conditioner cycle period, lead and lag set points, short cycle delay and economizer set points are all fully adjustable. Since all data is stored in flash memory, power outages do not result in lost data nor is there the need for periodic battery replacement.

Operator-friendly Front Panel

Operator interface is facilitated through a 16 character x 2 line, alphanumeric LCD display and keypad. Structure temperature in either degrees Fahrenheit or Celsius, automatic or manual control status and number of active alarms are normally displayed. Using the conveniently labeled keys, the operator is able to display set points for both cooling and heating, high and low temperature alarm set points and status of alarms and controls. Within status of controls there is a manual on/off override to enable manual control of all HVAC equipment.

Ease of Installation and Wiring

Measuring 10.5" x 9.3" x 2.15" (HWD), the Model 2430's slim profile affords easy wall mounting with minimum protrusion from the wall. The front panel is completely removable to allow fully open access for ease of field wiring. Primary power to the Model 2430 can be 110 VAC, 220 VAC or 12-50 VDC.